※  發明專利產品

HL-05-GS20

懸掛式鋼絲型光學影像篩選機

Optical image screening machine for hanging steel wire

參數規格Specifications

機臺外觀尺寸(長*寬*高)：

約2000mm*1000mm*2200mm

機臺重量：約450KG      

更換規格：約5分鐘

檢測范圍：

長度:5-30MM  

直徑：1.5-5mm

可裝3支CCD

速度最快可達1000支/分鐘

電源：交流單項220V  50HZ

功率：約3KW

Size of machine (L x  W x H):

About 2000mm*1000mm*2200mm

Machine weight: about 450KG

Replacement specifications: about 5 minutes

examination range:

Length: 5-30MM

Diameter: 1.5-5mm

Can carry 3 CCD

The fastest speed：1000 / min

Power: AC single 220V 50HZ

Power: about 3KW

可檢測項目Suitable for

○螺紋直徑公差檢測；○頭部最大/最小對邊公差檢測；

○最大/最小對角公差檢測；○螺紋牙中徑檢測；

○內孔與外圓同心度檢測；○牙距檢測；○有無螺紋檢測；

○頭部有無電鍍檢測；○斜牙檢測；

○頭部表面開裂（有油件、黑色、側面開裂除外）；

○粗細牙檢測；○頭部針孔堵塞檢測；○尾端尖銳度檢測；

○牙數檢測；○頭部真圓度測量；○有無十字針孔 ；

○各部位臺階公差檢測；○頭部厚度公差檢測；○Thread diameter tolerance detection; ○Maximum/minimum alignment tolerance detection on head ;

○Maximum/minimum diagonal tolerance detection; ○Thread middle diameter detection;

○Concentricity detection of inner hole and outer circle; ○Distance detection of teeth; Thread or not;○Electroplating on head or not; ○Oblique teeth detection;○Surface cracking on head (except for with oil parts, black, side cracking);

○Teeth thickness detection; ○Pinhole blockage detection on head;○ Sharpness detection of end;○Teeth number detection; ○Head roundness measurement;○ Cross pinholes or not;○Step tolerance detection of each part; ○Head thickness tolerance detection;